Confirming the DDE/EHLLAPI Settings

To check whether DDE/EHLLAPI is currently set to usable status, do the following:
  1. Click Settings → API.
  2. Make sure the DDE/EHLLAPI check box is selected.

    If the box is checked, DDE/EHLLAPI is set to usable status. Continue to step 4.

  3. If the box is not checked:
    1. Click the DDE/EHLLAPI check box and then click OK.
    2. Stop and then start your session to enable the new settings.
  4. If DDE/EHLLAPI was already set to usable status, select OK.