System i5, iSeries, eServer i5, or System Mode Description

PC400 initially uses mode description QPCSUPP on the iSeries, eServer™ i5, or System i5®. If the PC Support/400 program or iSeries Access is installed on the iSeries, eServer i5, or System i5, QPCSUPP need not be created. If mode description QPCSUPP does not exist on the iSeries, eServer i5, or System i5, create the mode description:

Enter the following command on the command line of the main menu of the iSeries, eServer i5, or System i5:

  CRTMODD

The Creating Mode Description panel appears.

                   Creating Mode Description (CRTMODD)
 
Type the selected items, and push the Enter key.
 
Mode Description.................            Name
Maximum Session.................. 8           1-512
Maximum number of interaction.... 8           1-512
Number of Local Control Sessions. 4           0-512
Number of Pre-joined Sessions.... 0           0-512
Inbound Pacing Value............. 7           0-63
Outbound Pacing Value............ 7           0-63
Maximum Length of Request Unit... *CALC           241-16384, *CALC
Text Description ................ *BLANK
 
 
 
 
 
                                                                        End
 F3=Exit    F4=Prompt         F5=Reshow    F10=Add parameter   F12= Cancel
 F13=How to use this panel                 F24=More key

Type the necessary values in each field, according to the following table.

Field Name	Input Value
Mode description	QPCSUPP
Maximum session	64
Maximum number of interactions	64
Number of local control sessions	0
Number of pre-joined sessions	0
Inbound pacing value	7
Outbound pacing value	7
Maximum length of request unit	*CALC
Text description	This field is optional

After you type all the values, press the Enter key.

This completes the creation of the mode description QPCSUPP.